公司最新产品-铁路磨轨机上市

一、       使用用途Application：

该产品主要用于精确打磨轨头，以及去除钢轨焊缝处的焊瘤，修整钢轨廓形达到标准要求。机体采用高强度铝合金架，装有偏向防滑导轮，可打磨轨头的两侧面、顶面及钢轨磨损所产生的毛刺，可90度不同角度调整打磨填补目前钢轨仿形打磨机领域空白。

For true-to-form and straight re-profiling of the rail head at weld joints as well as of built-up welded running surfaces. Body with high strength aluminum alloy frame, with bias anti-skid wheel, grinding rail two side and the top surface .It is special equipment for railway maintenance of rail grinding, adjusted at different angles of 90 degrees can fill the current grinding machine field blank.

二、产品特点Main Feature：

1、操作轻便适合各种铁路钢轨头外轮廓上平面，侧面及过渡圆弧的打磨作业。
2、针对钢轨打磨作业特殊性，发动机专利设计独立润滑系统，可持久倾斜90度或多角度对钢轨轨侧面和廓形进行精确打磨。

3、配备两个支撑滚轮和两个导轮，一个人就可以轻松使打磨机能够在钢轨上移动和作业，轻便、快捷。

4、可选择打磨机两端接上加长装置后，用来打磨轨面的波浪磨耗。

Has the function of profile grinding, make the rail welding seam smooth surface after grinding .The two ends of the grinding machine are connected with the lengthening device, which can be used to polish the wave abrasion of the rail surface. According to the particularity of the grinding operation, the research and development of patent lubrication system convenient rollover 90 degrees, in order to adapt to the side of the grinding head

三、       工作原理Operational Principle:

发动机带动小带轮转动，通过皮带传动带动磨头旋转，对钢轨产生打磨作用；通过旋转手轮控制升降杆的升降调整打磨位置；通过手把与底梁之间的弹性顶力定位打磨机位置，在倾斜扶手的同时实现打磨。

Engine drives the pulley to rotate, and the grinding head is driven to rotate by the driving belt to grinding the rail; By rotating the hand wheel control lifting rod of the lifting adjusting location polished; Through elastic beam between the hands and mudsill positioning grinding location, even in inclined handrails, grinding is realized.